HAUGA / ROSENTORP Table and 2 chairs
Choose Table colour:
Choose Chair:
How to get it
Checking availability...Collect 85 points with
It's OK to change your mind
Material
Table- Tabletop:
- Particleboard, Birch veneer, Stain, Tinted clear acrylic lacquer, Paper foil, Clear lacquer
- Under frame/ Leg:
- Solid pine, Adhesive, Stain, Tinted clear acrylic lacquer, Clear lacquer
Chair- Fabric/ Comfort filling:
- 100% polyester (min. 90% recycled)
- Base fabric/ Cover:
- 100 % polyester (100% recycled)
- Seat frame:
- Solid wood
- Seat:
- Layer-glued wood veneer
- Comfort material:
- Polyurethane foam 2.2 lb/cu.ft.
- Cover/ Smolder resistant lining:
- Polyester wadding
- Hook and loop fastener:
- 100 % nylon
- Piping/ Zipper:
- 100 % polyester
- Backrest frame/ Back frame/ Support:
- Steel, Epoxy/polyester powder coating
- Back panel:
- Fiberboard
- Comfort filling:
- Polyurethane foam 1.5 lb/cu.ft.
- Leg:
- Solid wood, Paint
Care
Removable coverChairMachine wash warm, normal cycle.
Do not bleach.
Do not tumble dry.
Iron medium temperature, max 300°F/150°C.
Dry clean any solvent except trichloroethylene.
TableWipe clean using a damp cloth and a mild cleaner.
Wipe dry with a clean cloth.
For maximum quality, re-tighten the screws when necessary.
Advice and care instructions
HAUGA Table705.767.20
Recommended for indoor use only.
Removable washable cover.
To prevent surface scratches, complete with TRIXIG stick-on floor protectors, sold separately.
Material
Table- Tabletop:
- Particleboard, Birch veneer, Stain, Tinted clear acrylic lacquer, Paper foil, Clear lacquer
- Under frame/ Leg:
- Solid pine, Adhesive, Stain, Tinted clear acrylic lacquer, Clear lacquer
Chair- Fabric/ Comfort filling:
- 100% polyester (min. 90% recycled)
- Base fabric/ Cover:
- 100 % polyester (100% recycled)
- Seat frame:
- Solid wood
- Seat:
- Layer-glued wood veneer
- Comfort material:
- Polyurethane foam 2.2 lb/cu.ft.
- Cover/ Smolder resistant lining:
- Polyester wadding
- Hook and loop fastener:
- 100 % nylon
- Piping/ Zipper:
- 100 % polyester
- Backrest frame/ Back frame/ Support:
- Steel, Epoxy/polyester powder coating
- Back panel:
- Fiberboard
- Comfort filling:
- Polyurethane foam 1.5 lb/cu.ft.
- Leg:
- Solid wood, Paint
Care
Removable coverChairMachine wash warm, normal cycle.
Do not bleach.
Do not tumble dry.
Iron medium temperature, max 300°F/150°C.
Dry clean any solvent except trichloroethylene.
TableWipe clean using a damp cloth and a mild cleaner.
Wipe dry with a clean cloth.
For maximum quality, re-tighten the screws when necessary.
- The cover has a lightfastness level of 5-6 (the ability to resist color fading) on a scale of 1 to 8. According to industry standards, a lightfastness level of 4 or higher is suitable for home use.This cover’s ability to resist abrasion has been tested to handle 55,000 cycles. 15,000 cycles or more is suitable for furniture used every day at home. Over 30,000 cycles means a good ability to resist abrasion.This seating furniture is tested and complies with relevant strength and durability standards. The tests simulate typical usage of the product and are based on use by persons weighing up to 110 kg.
Advice and care instructions
HAUGA Table705.767.20
This product is made up of more than one component. You can find the details of these components below.
Ratings and reviews
Customer reviews
This might not look like it but very sturdy and nice build quality. Assembly was easy and took around 1 hour for everything. Looks pretty good just like the pictures 
